How to install a bathroom shower head?

1. Measure the length of the shower head first, and drill three holes with a diameter of 6 mm and a depth of 35 mm at the half-length interval of the shower above the outlet of the faucet.
2. Before drilling, wrap the faucet with cloth to prevent the faucet from being soiled or damaged.
3. Drive the expansion pipes into the drilled holes separately, and fix the wall seat on the wall with self-tapping screws. At this time, it must be noted that the wall seat must be on the same base line as the faucet outlet.
Before installing the shower faucet, it is necessary to install the filter first. The filter screen can filter the sand and gravel brought by the water flow. Although it may be blocked, it can protect the main part of the faucet - the valve core from the harm of the sand and gravel conflict. The height of the shower head is related to its installation method. Generally speaking, the height of the hidden shower outlet from the floor is 210 cm, and the height of the shower faucet switch floor is 110 cm. The other is an exposed lift shower. Generally speaking, the installation height of this shower head is 200 cm from the floor between the water surface of the shower head.

The above is the introduction about the installation of the bathroom shower. The bathroom shower is one of the important building materials in our home decoration. When installing the bathroom shower, you should pay attention to the installation height of the bathroom shower and the precautions for the installation of the bathroom shower. .

Hot Products