The thermostatic faucet also needs maintenance. Here is an introduction to the maintenance skills of the thermostatic faucet:
1. Installation
Please have experienced professionals for construction and installation. During installation, the
shower head should try not to collide with hard objects, and do not leave residual debris on the surface. Special attention should be paid to removing debris in the pipeline before installation to avoid blockage and Damage the gloss of the surface coating.
2. Clean up
Under the condition that the water pressure is not lower than 0.02mPa (ie 0.2kgf/cm3), if you find that the water output decreases and the water heater is turned off, you can gently unscrew the screen cover at the water outlet of the shower to remove Impurities can be restored as before. Due to the complex internal structure of the shower, do not forcibly disassemble the shower.
3. Switch
Do not use excessive force when switching the shower faucet and adjusting the shower water delivery method, and pay special attention not to use the faucet handle and shower bracket as a handrail for support or use.
4. Place
The metal hose of the bathtub shower head should be kept in a natural stretch and should not be coiled around the faucet when not in use. At the same time, pay attention not to form a dead angle at the joint between the hose and the faucet, so as not to break or damage the hose.
Thermostatic faucets are generally used in European and American countries, but they have not been popularized in China. The valve core of the thermostatic faucet is very precise, and the water quality will affect the sensitivity of the valve core. When you buy a thermostatic faucet, it will be equipped with two filters, which are installed in the inlet nut to filter impurities. It is recommended to buy some products specially produced by export manufacturers.
The function of the thermostatic faucet is to maintain a constant water temperature. The thermostatic faucet cannot display the water temperature, nor can the water temperature be specified. The scale of the handwheel of the faucet can only be an approximate value. The general thermostatic faucet has overheating protection, which is about the 38° scale line. If you want to increase the water temperature, you must press the raised button to turn the handwheel.
The thermostatic faucets on the market mostly use memory alloy, paraffin, and pressure regulator valve to achieve the constant temperature effect. Generally speaking, the thermostatic faucet of memory alloy has a fast induction speed to temperature changes and a small temperature deviation, which is the first choice for thermostatic faucets.
With thermostatic showers and thermostatic faucets, you no longer have to worry about your family being scalded when taking a bath, refuse to be hot and cold, and keep a warm core!
英语
西班牙语
