news

What are the key points of concealed shower head installation?

2022.02.16
1. When we install the shower head, the first thing we need to determine is the height of the shower head mixing valve from the ground. Generally, before installing the shower head, we have already determined the installation place of the shower head. Then the distance between the shower head mixing valve and the ground is generally controlled within the height range of about 90~100cm. Within this range, we can also fine-tune according to our own height. But generally it should not be higher than 110cm, if it is too high, it may cause the shower head riser to not be installed.
2. Generally, the reserved wire head of the installed shower faucet is just buried in the wall tiles. Covering just right with a decorative cover is fine. Otherwise, it will not look very beautiful. Therefore, when laying pipes, you should first consider reserving the position, which is generally 15mm higher than the rough wall, so that when the tiles are pasted, the silk head can be buried to ensure the appearance of the wall.
3. The general standard for the spacing reserved for the inner wire elbow of the shower head is about 10~15cm. Generally, when buying a shower head, the seller will give two adapters, so that the water outlet of the mixing valve can be well connected to the hot and cold water outlet on the wall. However, try not to use the adapter to transfer as much as possible, which is more beautiful.
4. There are many types of shower heads on the market, including surface-mounted, wall-mounted and ceiling-mounted. Therefore, before purchasing, you must know whether the water pipes laid in your home match. Do not blindly choose the shower, causing unnecessary losses.



Hot Products